Skip to main content

On our last trip, RITV, we experienced problems with our black tank sensors. Last year we started using Unique treatment for the black tank. Due to the problems we recently experienced, we decided to try the Unique Tank Sensor cleaner. After filling the black tank to the top I used 1/2 bottle of the Unique Tank Sensor cleaner and let it sit for 7 days. After emptying the tank and giving it an additional rinse, I measured the amount of water installed in the tank. The sensor measured accurately at empty, 1/3 tank (15 gallons), 2/3 tank (30 gallons) and full tank. While not a real world example, the tank showed accurate measurements using clean water. Will be watching it closely on our next trip.

Attachments

Images (1)
  • E4DF2A8E-6004-476F-A6D0-A20D247CB427
Original Post

Replies sorted oldest to newest

We have been using the Unique brand of tank cleaning products for a year and they work great!  The Unique tank treatment product is the best we have ever used.  No tank “piles” and it truly breakers everything down so that it easily flushes out of the tank with no clogs.   We are full timers in our 2375 and we have tried just about every quality product on the market and this is the best.  

Not full timing but on the road about 9 months a year since 2014.
I use to always use Pure Power Blue except when I couldn't find it, then it would be what ever RV tank cleaner I could find. Lately I've been trying the Happy Camper that a lot here uses.
My results are as long as you properly flush your tanks it doesn't matter what you use.

Black water tank: Every second dump add a half cup of Borax dissolved in 4 pints (a kettle full) of hot water then add half cup of Dawn.

Grey water tank: Every second dump add a half cup of Borax dissolved in 4 pints (a kettle full) of hot water then add half cup of Zep (Heavy duty Citrus degreaser & cleaner)

Never had sensor problems.

Someone said they use 2 big bottles of Coke and leave for a day then all sensors work ok again.

image

Attachments

Images (1)
  • image

Yep, what @TSR Campers said. The borax acts as a water softener and releases disolved oxygen into the water aiding the non stinky biological activity digest stuff. The Dawn is a detergent that helps break up solids and emulsify oils/greases. Many other additives do the same at a  higher price point while others surpress or stop biological activity but don't disolve solids or clean.

TR Bolin did a great YouTube video on this method. He explains it accurately.

https://youtu.be/wUWGlm2gQfE

Last year I decided to do the Dawn and borax flush on the gray and black tanks.  After about 100 miles of sloshing around in the tanks, I dumped them right after I got home and closed the knife valves.  About a month later, we took the camper out for a week.  When we got home, I was dumping the tanks and found that the knife valves on both tanks were stuck shut (the first time this has happened in 10 years).  I was finally able to get them opened, dumped and flushed.  I was able to get them lubed and now they are working properly. 

I would never do the Dawn and borax flush unless you have a way of lubricating the rubber seals on the knife valves.

I drilled a tiny hole in the end of the valve where the rod the handle is attached to.  I sprayed silicone lube in and put a small screw to seal the hole.

Our black tank sensors work flawlessly...until the second poo drops in the toilet. The ONLY accurate gauge is shining a flashlight down the toilet.

Tank sensor cleaners may work on sensors that have crud built up on them and that is especially true for the grey tank if greasy dishes are washed without wiping the gunk off first.

@Bucky posted:

Last year I decided to do the Dawn and borax flush on the gray and black tanks.  After about 100 miles of sloshing around in the tanks, I dumped them right after I got home and closed the knife valves.  About a month later, we took the camper out for a week.  When we got home, I was dumping the tanks and found that the knife valves on both tanks were stuck shut (the first time this has happened in 10 years).  I was finally able to get them opened, dumped and flushed.  I was able to get them lubed and now they are working properly.

I would never do the Dawn and borax flush unless you have a way of lubricating the rubber seals on the knife valves.

I drilled a tiny hole in the end of the valve where the rod the handle is attached to.  I sprayed silicone lube in and put a small screw to seal the hole.

Why would you blame the borax/Dawn treatment? Did you do further rinces until the rinse water ran clear? You shouldn't store the trailer with empty tanks. Alway add a few gallons of water to prevent the knife gate seals from drying completely. Did you follow the full procedure?

Sounds to me that the 1 treatment loosened stuff. Watch the video I linked above.

@VigII posted:

Why would you blame the borax/Dawn treatment? Did you do further rinces until the rinse water ran clear? You shouldn't store the trailer with empty tanks. Alway add a few gallons of water to prevent the knife gate seals from drying completely. Did you follow the full procedure?

Sounds to me that the 1 treatment loosened stuff. Watch the video I linked above.

I did rinse the tanks a couple of times after I dumped the Dawn and borax solution.  I did add water and Happy Camper before I stored it.  The treatment seemed to remove the lubricity from the seals.  Even after several dumps and flushes over the next couple of weeks, it was still difficult to get the valves open and closed.  I have never had this problem before I did the treatment.

I was going to replace both valves if the mod I made to the valves didn't work.  Valve replacement would have been very difficult in the very small dump compartment.

Add Reply

Post
Lance Owners of America - All Rights Reserved 2000 - 2024
×
×
×
×
Link copied to your clipboard.
×