Skip to main content

Not as cool as I expected for 270 bux...

pro's

1. it's shiny and will look good on the trailer

2. it's better than plastic

3. it might add 32 seconds to the time it would take a thief to steal my batterys

con's

1. it might add 32 seconds to the time it would take a thief to steel my batterys

2. 270 bux

3. the lock is useless unless you like throwing locks that dont unlock with ease

 

Seriously, it looks as though you could clip through the lock hole with a pair of dikes or pry the top open with a large screwdriver.   Other than that I'm very happy with it and can't wait to get it set up.

Original Post

Replies sorted oldest to newest

I installed mine late last week after returning from an 850 mile excursion with my 1985.

I agree with your review 100%, including the part that "I'm very happy with it".

I like it because everything goes into the box and there is plenty of room, and it only needs one function to unlock it versus undoing the box straps.  I purchased the box designed for two six volt batteries even though I'm running two group 24's.  I also replaced the locks (plural because I also own the propane lock system, which is also a good product).  I gave the original locks to my neighbor.

On the down side, I had to pull the lifting handles on the batteries after I got them installed in the box (hint: this is where a good old church-key works like a charm) so I could utilize the supplied straps to secure the batteries.

Also, TorkLift utilizes plasma cut technology to cut the parts for their products.  Nothing wrong with that but laser cutting or a punch-press produces a much cleaner and less ragged and more professional looking product.

That said, I hope the guys at Torklift make a boatload of dough and continue producing useful stuff.

Regardless whether you use this product  or the plastic boxes: GET YOURSELF WRENCHES WITH INSULATED HANDLES Apologies for shouting but you can really make some sparks if the wrench hits the aluminum rock guard on the front of the trailer. I wouldn't know about that move!

 

 

 

 

Originally Posted by Steam_Guy:

: GET YOURSELF WRENCHES WITH INSULATED HANDLES Apologies for shouting but you can really make some sparks if the wrench hits the aluminum rock guard on the front of the trailer.


Always remove the negative ground first and reconnect it last and you won't have that issue!

Always remove the negative ground first and reconnect it last and you won't have that issue!

 

Thanks for the tip that, after 66 years, I had just neglected to remember.  I suppose everyone screws up but taking off rings, watches & using an insulated wrench is still a good idea when working around that much juice.

Add Reply

Post
Lance Owners of America - All Rights Reserved 2000 - 2024
×
×
×
×
Link copied to your clipboard.
×