Lippert Friction Hinge-Replacing door strut

I like the removal of the gas strut on the door. I am curious to know how you attached the metal door holder.

scotch extreme mounting tape  Others have used a 3M tape product.  Has stayed on and solid!

@diamonds posted:

I had to shorten some of the included self tapping screws but overall it was an easy install.

What was the indication that you need to shorten the screws?  I am looking into this modification and am curious if there is something behind the door frame I need to be aware of.

Thanks,
Mike

Mike,

I can’t be too specific because I don’t know.  When I drilled I didn’t hit anything that stopped me but when I fastened there were a few spots that the screws would not go all the way in...not everywhere but a few holes with some framing or barrier. .  So I cut those and all has held great and hinges work great.

Sumner

@diamonds posted:

Mike,

I can’t be too specific because I don’t know.  When I drilled I didn’t hit anything that stopped me but when I fastened there were a few spots that the screws would not go all the way in...not everywhere but a few holes with some framing or barrier. .  So I cut those and all has held great and hinges work great.

Sumner

Perfect - thanks!

I like the idea of adding a friction door hinge to my 2375.   Was there a particular model Lippert hinge required?

https://store.lci1.com/frictio...hite-2020109835.html

Diamonds, much obliged.

Recommend a plastic door hook due to rusting.  

@Nicholas posted:

Recommend a plastic door hook due to rusting.  

Stainless is a stronger lifetime replacement and inexpensive...