Tagged With "turnbuckle tension"

Living in KS - wind is our friend/enemy - but I found the spiral stakes work well in most soil types - I picked this kit up off of Amazon - Camco 42593 Awning Anchor Kit with Pull Tension Strap The one think I found with the springs, they will allow the awning to lift the poles off the ground slightly in strong winds, but not enough to allow the awning to be damaged. The springs are not required and the spiral anchor can be picked up at Walmart in the pet department... There are curved...

I installed insect screens on the outside appliance inlet/outlets. This include the Refrigerator covers (top/bottom), furnace exhaust, and water heater exhaust. They are Camco brand (links to Amazon for reference): Refrigerator : Camco 42139 RS620 Flying Insect Screen for Dometic RV Refrigerator Vents (Required 2 packages, one top and one bottom cover) Furnace/Water Heater : Camco 42150 Flying Insect Screen - WH 200,4.5" X 4.5" X 1.3" (Required 2 packages, 1 for each exhaust) Refrigerator :...

I moved the grounding point to the frame per your example, and it still did not work. My wife and I took the Lance to a music festival over Labor Day weekend, so I had to use the manual crank to hook and unhook the trailer. I found that it wasn't terrible if I used a breaker bar, even though because we use the Andersen hitch, you need to go up and down an extra time to tension the chains. In what I hope is the final chapter of this story, I called the manufacturer and recounted my story to a...

Hi Chris - Not sure if you ever straightened out the retraction issue on your jack. I was wondering if calibrating it might get it working correctly. On the 3rd page of the instruction manual there is a section "CALIBRATION METHOD TO SET TRAVEL LIMITS" https://ultra-fab.com/wp-conte...RUCTIONS-r051519.pdf Maybe that might help get it to fully retract? Henry