Reply to "Mopeka Pro Check Water Sensor"

PeterPamCamp Host FreeLOAderLifetime Member

@VigII posted:
Did you find the bubble level setting in the app? I fooled it to interpret that the sensor was a close to level as I could. That setting is what I attribute the accuracy at higher levels. I don't know the sensor's ultrasound cone angle is but setting a "level" baseline made a difference in my installation since my sensor is mounted on a sloped pat of the tank.

That’s what I did also. I mounted the sensor then pushed up on the low edge of the tank right next to the sensor to get it level, then set it as level and let it go back to its normal position. I used a wooden rod on top of a hydraulic jack to push it up. It didn’t take much, just a touch.

4/16/249:43 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...