Tagged With "battery jumper terminals"

Very nice install. Thanks for posting and a BIG LOA THANKS to Torklift

HAMSTERS!!!!! Great install report, Mike! Nice to see the new-generation 1575 has a wide battery bracket/tray to accommodate Torklift's PAS box. Much simpler to deal with than our first-gen. 1985!!! [slightly too narrow and close to the nose - req'ing any of several less simple options - see here: Torklift's New Power Armor Solar Battery Box ]. Still curious how and whether these PASes will fit onto the tongues of the other new-gen. Lances, what with the recessed battery tray under the new...

Very nice Mike....

You lucky dog!! The Torklift company is very generous!

A short while back someone asked what mods we would be looking to make in 2016. I mentioned I would like to make secure my two 12v Interstate batteries that are sitting on the tongue of our 1575. Shortly afterwards I was contacted by Kerstin at Torklift International who asked if I would like to evaluate one of their PowerArmor products for free. Of course I was more than happy to do so. I know that Plance has already documented a similar install but wanted to share my experience. Hopefully...

I have a similar one to Gus and BMJ. It's a craftsman brand with an AGM battery and smart charger. I made a pair of custom 'jumper' cables for it: one set connects directly to the motor on the slide and one directly to the motor of the canopy; just in case... John

Hum The advertising is let's say a bit optimistic. Probably be able to jump start a battery 1 time in the south , but probably not once in cold weather, The device weight 1 lbs, about the weight of 8 size C batteries. Waste of money. And look at the length of the jumper cable!! and worse of the size of wire !!! And I found out this thing is a 12,000mAH or 12Ah and at 50% is 6Ah, This fit in your hand?? Good luck WoodGlue, but if I was you i would cancel that order right away