Reply to "Mopeka Pro Check Water Sensor"

PeterPamCamp Host FreeLOAderLifetime Member

@Brubie posted:
I plan to add another sensor to my gray tank, but due to travel this winter/spring, haven’t had the chance yet. Let us know how your install goes.

I've now installed the Mopeka Pro Check Universal sensor on my gray tank. It went just like the installation on the fresh water tank. I installed it in the same relative position. It's about 9" from the curb side of the tank and about 12" from the front edge of the tank to the center of the hatch which is approximately the center of the tank from front to rear. I didn't encounter any obstructions nor did a I see anything in the void space between the belly pan and tank anywhere near the hole I cut for the hatch.

To calibrate the tank size I added water to the gray tank though the shower drain with a hose and hose-end meter

I'm not posting any photos because they would be just like the one's previously posted by @VigII.

4/19/241:19 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...