Reply to "IRVWPC - Intelligent RV Water Pump Controller"

rwb_wlCamp Host Lifetime Member

I got around to sanitize my water tank yesterday, and turned on the pump, as I installed the water pressure regulator a couple of weeks ago.

I had left taps open for winter, and when I turned on the pump, water from galley sink and shower. Luckily I had some towels to wipe up!

I was pleased that the pump was so quiet, and no longer had water hammer. I could run the tap at low pressure, and no longer the pump surging. I have only configured the pump to recognize the hot water tank, as they default to tankless water heaters. I may do some more configuring.

I was going to originally install an accumulator tank, but happy that I bought this pressure controller.

On our 1995, difficult to get to wiring at back of pump, so removed the 4 screws holding it onto a mounting board.

Programming is via dip switches and a round dial. After I re-install the heater duct, I will use velcro to fasten to a surface.

Attachments

Hide

Images (2)

4/8/234:38 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Attachments

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...